M.To add a SNiP wind load definition

To add a parametric wind load definition per the SP 2.07.7 or SP 20.13330.2016 Loads and Actions building codes, use the following procedure.

Tip: Change units for convenience.

Note: Wind loads generated for SP 2.07.7 or SP 20.13330.2016 codes are only available for models with a Y-up orientation.

In the Load & Definition dialog, select the Definitions > Wind Load entry and then click Add.
The Add new: Wind Definition dialog opens.
Select one of the following options from the Code drop-down list:
- SNiP 2.07.7-85
- SNiP 20.13330.2016
Tip: You can also type optional Comments to further describe the wind definition (e.g., Wind in X direction).
Click Add.
The definition type is added to the Definitions > Wind Load entry in the Load & Definition dialog.
In the Load & Definition dialog, select the new wind definition type and click the Add.
The Add New: Wind Definitions dialog opens. The dialog now displays the Intensity and Exposures tabs.
Note: The previously selected Code displays as a read-only selection.
Type the Wind Pressure.
Select the Terrain type from the drop-down list.
Select the Region from the drop-down list.
Type the Delta value.
Click Add.