STAAD.Pro HelpModelingM. Checking Your Model M. Checking Your Model STAAD.Pro comes with a number of tools used to check your structure and model objects. M. To check for multiple structuresTo check for multiple, independently defined set of entities in your model, use the following procedure. M. To check for warped platesA warped plate is defined as a four-noded plate whose nodes do not lie on the same plane. This tool detects such plates.M. To check for and remove duplicate entitiesTo detect the presence of and remove instances of nodes, beams, plates, etc. which are duplicates, use the following procedure. M. To detect and remove zero length membersM. To check for overlapping collinear membersM. To change a beam incidenceTo change the incidences of a selected set of beams, use the following procedure. M. To detect and remove orphan nodesTo detect and then remove nodes which are not connected to any other model entity (i.e., orphan nodes), use the following procedure. M. To display the distance between two nodesTo temporarily display the dimension between two nodes in the active View window, use the following procedure.M. To display beam lengthsTo display the lengths of each analytical member, use the following procedure. M. To check for negative volume solidsTo check for solids that would result in a negative volume in the analysis, do the following. Parent Topic: Modeling