STAAD.Pro HelpAnalysis Analysis This section of the help describes the analysis methods, data print commands, and how to perform analysis in STAAD.Pro A. Types of AnalysisA. To add a change commandTo add a change command which is required for performing a subsequent analysis command, use the following procedure. A. To generate a floor spectrumTo calculate the floor spectra from time history acceleration, use the following procedure. A. To specify pre-analysis commandsTo instruct the program to include model input data in the STAAD output file (.anl), use the following procedure. A. To create a load listTo create an active list of load cases for use with subsequent print and design commands, use the following procedure. A. To check for soft stories and seismic code irregularitiesTo check for soft stories and other seismic code irregularities in rigid diaphragm structures, use the following procedure. A. To specify post-analysis print commandsTo include additional analysis results in the STAAD output (.anl) file, use the following procedure. A. To perform an analysis in STAAD.ProOnce you have completed the input file, use the following procedure to perform an analysis and optional design. A. To run analysis on the cloudTo use Bentley's Cloud Services to perform analysis and batch design on your model, use the following procedure.A. To view analysis outputTo open the results of analysis and design, use the following procedure.Parent Topic: STAAD.Pro Help