STAAD.Pro HelpModelingM. Loading Your ModelM. Wind Loads M. Wind Loads This section describes how to add wind loads to your STAAD.Pro model. M. To add a wind load definition To add a custom wind profile definition to your model, use the following procedure M.To add an ASCE 7 wind load definition To populate the wind intensity table with values calculated per ASCE 7, use the following procedure. M.To add a SNiP wind load definition To add a parametric wind load definition per the SP 2.07.7 or SP 20.13330.2016 Loads and Actions building codes, use the following procedure. M. To add a GB50009 wind load definitionTo add a wind load definition and load cases for the Chinese GB50009-2012 code, use the following procedure. M. To add an IS-875 (Part 3): 2015 wind loadTo add a wind load definition and load cases for the Indian IS-875 (Part 3): 2015 code, use the following procedure. M. To assign exposure for jointsTo assign wind load definition exposure to joints, use the following procedure. M. To apply a wind loadTo apply a defined wind load to your structure, use the following procedure. M.To apply a dynamic wind load per SP 20.13330.2016To apply a SP 20.13330.2016 wind definition as a dynamic load to your structure, use the following procedure. Parent Topic: M. Loading Your ModelRelated ConceptsEX. US-15 Wind and Floor Load Generation on a Space FrameEX. UK-15 Wind and Floor Load Generation on a Space Frame