Skip to main content Skip to docs navigation

STAAD.Pro Help

STAAD.Pro Help

STAAD.Pro Help Getting Started What's New?Tutorials Modeling M. Navigating the Graphical View Window M. Creating Model Objects M. Properties and Specifications M. Supports M. Loading Your Model M. Available Structural Load Specifications in STAAD.Pro M. To create a new primary load case M. Load Items M. Wind Loads M. Seismic Loads M.Response Spectra M. Snow Loads M. Notional Loads M. Moving Loads M. Time History Loads M.Pushover Loads M. To use starting vectors with load-dependent Ritz vectors M. Load Combinations M. To add a repeat load case M. To create a reference load M. Damping Modeling M. Mass Modeling M. Rules Used for Generation of Mass Models M. To generate a mass model M. To add a mass model reference load M. To add mass loads to the mass model reference load M. To create a load envelope M. To edit a previously assigned load M. Piping workflow M. Bridge Deck workflow M. Checking Your Model M. Physical Modeling workflow Analysis Design Postprocessing and Reports Data Files and Interoperability General Engineering Theory Technical Reference of STAAD Commands Ribbon Control Reference Verification Examples Application Examples OpenSTAAD

STAAD.Pro Help
Modeling
M. Loading Your Model
M. Mass Modeling

M. Mass Modeling

M. Rules Used for Generation of Mass Models
The following rules are applied by the program when the Mass Model Generator tool is used to create equivalent mass loads from gravity loads.
M. To generate a mass model
To automatically generate from existing primary load cases or reference load definitions, use the following procedure.
M. To add a mass model reference load
M. To add mass loads to the mass model reference load

Parent Topic: M. Loading Your Model