M. To generate a mass model
To automatically generate from existing primary load cases or reference load definitions, use the following procedure.
Your model must contain one or more primary load cases or reference load definitions as load sources. The load case types must be defined as: dead, live, snow, ice, crane hook, or dust. Load types that are included by the mass model generator include (other load types which are part of selected load cases are not included in the generated mass model):
Self-weight | Self-weight |
Nodal Load | Node |
Member Load | Uniform Force |
Concentrated Force | |
Trapezoidal Load | |
Hydrostatic Load | |
Physical Member Load | Uniform Force |
Concentrated Force | |
Trapezoidal Load | |
Floor Load | Floor |
Plate Load | Pressure on Full Plate |
Concentrated Load | |
Partial Plate Pressure | |
Trapezoidal | |
Hydrostatic | |
Element Joint Load | |
Solid Load | Solid Pressure Load |
Repeat Load | Repeat Load |
Reference Load |
Any load case or reference load of load type mass will automatically be included in the generated mass model. The generated mass model contains all load items from the included load sources. These load items are factored using the specified load factors and act in the global X, Y, and Z directions.