In order to generate a set of static loads, due to the
movement of the vehicle or load on the structure, there are multiple steps
involved.
Note: This procedure is
used to generate a set of static loads at intervals on a structure. The
Bridge Deck
workflow
can also be
used to automatically place loads at locations to achieve maximum or minimum
actions on a bridge deck.
-
Either:
- on
the
Loading ribbon tab, select the
Moving Loads tool in the
Loading group
- Select
Vehicle Definitions under
Definitions in the
Load & Definition dialog and
then click
Add.
The
Add New Vehicle Definition dialog
opens.
-
Specify a
Vehicle Type Ref number.
This identification number is used to refer to this
vehicle load definition in the moving load generator.
-
Either:
- define a custom vehicle using the
Define load tab
- select a standard AASHTO vehicle
definition using the
AASHTO Spec tab
- select an external file containing
vehicle data using the
File Input tab
-
Click
Add.