|
Applied Story Forces
|
Used to display generated story loads for seismic, wind and user defined lateral load cases. |
|
Member Forces
|
Used to display on the model Member Forces due to a given load case. |
|
Building Story Shears
|
Used to display on the model Story Shears due to a given load case. |
|
Frame Story Shears
|
Used to display on the model Story Shears in each Frame due to a given load case. |
|
Member Forces Envelope
|
Used to display on the model the envelope of forces at the member ends. |
|
Diagrams
|
Used to display diagrams of any of the analyzed load cases. |
|
Reactions
|
Used to display reactions at foundation nodes of any of the analyzed load cases. |
|
Deflected Shape
|
Used to display the deflected shape of the structure due to a given load case. |
|
Mode Shape
|
Used to display the mode shapes of the structure due to the Eigen Solution Dynamic load case. |
| Stress
and Internal Force Contours |
Used to display stress or internal force
values as surface contours for walls and diaphragms on the
model. |
|
Drift - At a Point
|
Used to display a report of the drift at a given point due to all
analyzed load cases. |
|
Drift - At Control Points
|
Used to display a report of the drift at up to four predetermined
control points. |
|
BS 5950 Lambda Critical - At a Point
|
Used to display a report of the Lambda Critical values at a given point due to notional load cases. |
|
BS 5950 Lambda Critical - At Control Points
|
Used to display a report of the Lambda Critical values at up to four predetermined control points. |
|
Redundancy Factors
|
Used to display the redundancy factors for each of the frame members. |
|
Center of Mass
|
Used to display the center of mass locations for rigid diaphragms. |
|
Center of Rigidity
|
Used to display the center of rigidity locations for rigid diaphragms. |
|
Wall Group Forces
|
Used to display on the model Wall Group Forces due to a given load case. |
| Shear Wall Forces Module |
Used to launch the Shear Wall Forces module. |
