Skip to main content Skip to docs navigation

STAAD.Pro Help

STAAD.Pro Help

STAAD.Pro Help Getting Started What's New?Tutorials Modeling Analysis Design Postprocessing and Reports Data Files and Interoperability General Engineering Theory Technical Reference of STAAD Commands Ribbon Control Reference Verification Examples Application Examples EX. Chinese Design Examples EX. CIS/2 Example Models EX. Structure Wizard Macro Example Files EX. OpenSTAAD Example Files EX. Physical Model Examples EX.Tutorials EX. American Design Examples EX. British Design Examples EX. Modeling Examples EX. Steel Design Examples EX. Interactive Concrete Design Examples EX. Bridge Deck Loading Example EX. Pushover Analysis Example EX. To create model used for pushover example EX. To define general pushover data EX.To define loading pattern and spectrum data EX. To define the solution control EX. To assign the member-specific parameters EX. To specify and run the pushover analysis EX. To review pushover displacement results OpenSTAAD

STAAD.Pro Help
Application Examples
EX. Pushover Analysis Example

EX. Pushover Analysis Example

This single moment frame analyzed using a Pushover Analysis.

EX. To create model used for pushover example
To quickly set up the model used for this example, use the following procedure.
EX. To define general pushover data
EX.To define loading pattern and spectrum data
EX. To define the solution control
EX. To assign the member-specific parameters
EX. To specify and run the pushover analysis
EX. To review pushover displacement results

Parent Topic: Application Examples