To quickly set up the model used for this example,
use the following procedure.
Only one pushover
definition can be added to a model. Therefore, this example with start with a
model you can add the pushover definition to. The end result will be
functionally equivalent to the example model installed with the program.
-
Start an empty
STAAD.Pro model in the analytical modeling
worfklow.
-
On the
Utilities ribbon tab, select the
Command File tool in the
Edit group.
The
STAAD.Pro Editor window opens.
-
Click
Copy to Clipboard below.
STAAD PLANE
START JOB INFORMATION
ENGINEER DATE 07-Oct-05
END JOB INFORMATION
INPUT WIDTH 79
UNIT INCHES KIP
JOINT COORDINATES
1 0 0 0; 2 0 118.11 0; 3 118.11 118.11 0; 4 118.11 0 0; 5 0 236.22 0;
6 118.11 236.22 0; 7 0 354.331 0; 8 118.11 354.331 0; 9 0 472.441 0;
10 118.11 472.441 0; 11 236.22 118.11 0; 12 236.22 0 0; 13 236.22 236.22 0;
14 236.22 354.331 0; 15 236.22 472.441 0;
MEMBER INCIDENCES
1 1 2; 2 2 3; 3 3 4; 4 2 5; 5 5 6; 6 6 3; 7 5 7; 8 7 8; 9 8 6; 10 7 9; 11 9 10;
12 10 8; 13 3 11; 14 6 13; 15 8 14; 16 10 15; 17 11 12; 18 13 11; 19 14 13;
20 15 14;
DEFINE MATERIAL START
ISOTROPIC STEEL
E 29732.7
POISSON 0.3
DENSITY 0.000283
ALPHA 1.2e-005
DAMP 0.03
END DEFINE MATERIAL
MEMBER PROPERTY AMERICAN
2 5 13 14 TABLE ST W16X26
8 11 15 16 TABLE ST W16X26
1 3 4 6 17 18 TABLE ST W24X55
7 9 10 12 19 20 TABLE ST W24X55
CONSTANTS
MATERIAL STEEL MEMB 1 TO 20
SUPPORTS
1 4 12 FIXED
LOAD 1 LOADTYPE GRAVITY
SELFWEIGHT Y -1
MEMBER LOAD
2 5 8 11 13 TO 16 UNI GY -0.2
FINISH
-
In the
STAAD.Pro Editor window,
select the
Paste tool on the
Home ribbon tab.
The model contents are pasted into the editor.
-
Save and close the
STAAD.Pro Editor.
The model opens in the
Analytical Workflow.