P. To display results diagrams on the members

To display the results diagrams drawn on to the members, use the following procedure.

On the Results ribbon tab, select one of the graphical results tools in the View Results group:

Displacement	FY	MY
Utilization Ratio	FX	MZ
FX	MX	Beam Stress

Tip: Alternatively, you can select the Layout > Beam Forces tool in the View Results group on the Results ribbon tab to display the major axis bending graphs on the members (MZ).

The selected diagram is drawn on the members.

Note: The selected tool is shaded to indicate it is active.

Optional: Either:
- repeat step 1 to select different diagrams as needed
- select the active diagram tool to hide the diagram
Tip: Multiple diagrams may be displayed simultaneously.
To change the scale of any diagrams:
1. On the Results ribbon tab, select the Scale tool in the Configuration group.
  
  The Diagrams dialog opens to the Scales tab.
2. Change the scale factor for the relevant item in the Results Scales group.
  
  Tip: Smaller values result in more exaggerated diagram sizes.
3. Click Apply to update the diagram.
4. Click OK to close the dialog.

Note: Please note the following for results diagrams

Result diagrams are rendered in the same drawing style, and for base load cases also with the same colors as in the current axial diagram.
The Compression Diagram is presented on the left side of the member, and the Tension Diagram on the right side.