STAAD.Pro HelpPostprocessing and ReportsP. Postprocessing WorkflowP. Nodal Results P. Nodal Results This section describes how to display and review analysis results for nodes. P. To display displacementsTo view the displaced shape along with nodal and beam displacements for the current load case, use the following procedure.P. To display the deflect shapeTo display the deflected shape of the structure including beam section displacements, use the following procedure.P. To display the support reaction valuesTo display the support reaction values for the current load case, use the following procedure. P. To graphically display reactions at each supportP. To display load versus displacement graphTo display the load level versus displacement curve for a selected node and load case, use the following procedure. P. To display base pressure results To display soil pressure at support node locations for slabs consisting of plate elements which have been generated using elastic mat or plate mat commands, use the following procedure. P. To display nodal instabilities To graphically examine nodes and degrees of freedom on the structure where instability conditions have been reported in the output, use the following procedure.Parent Topic: P. Postprocessing Workflow