To change the steel beam profile or effective flange
width, use the following procedure.
The program will
use the assigned steel sections for beams and also automatically calculate the
effective flange width of the composite section. However, you can update steel
sections from the
Composite Decks dialog as well as
specify a value for the effective flange width.
-
Select a beam in the
Composite Decks dialog within a
composite deck name.
The beam options are displayed in the dialog.
- Optional:
Click
Add/Change Property to open the
Section Profile Tables dialog.
From there, you can select a different beam or beam
properties.
Note: You should
not specify a composite section type
specification for these beams. The use of the composite deck definition allows
the program to calculate all the necessary composite section parameters
automatically. Refer to
G.6.7 Composite Beams and Composite Decks
for details.
- Optional:
Type an
Effective Width in the current units and then
click
Update to change the effective width of the
composite deck for the beam.