To include additional analysis results in the STAAD
output (.anl) file, use the following procedure.
Note: All output values
will be available in the postprocessing workflow, regardless of whether you add
them to the output file. Similarly, you can add post-analysis output to a
report even if not included in the output file.
-
Select the
Post Analysis Commands tool in the
Analysis Data group on the
Analysis and Design ribbon tab.
The
Analysis/Print Commands dialog for
post-analysis commands opens.
Tip: If
the dialog does not immediately open, click
Define Commands on the
Post Analysis Print - Whole
Structure dialog.
-
Select the tab pertaining to the output you want to add to the
output file.
-
Check the
After Current option to insert the print
command following the currently selected command within the
Post Analysis Print - Whole
Structure dialog.
Otherwise, the print command will be added to the
end of the STAAD input file.
-
Click
Add.
The command is added to the STAAD Input file.
- Optional:
Repeat steps 2 through 4 to add additional print commands as
needed.
-
Click
Close.
Note: Some print commands
require a assignment. These will be marked with question mark (?) in
Post Analysis Print - Whole Structure
dialog. Use the
Assignment Method tools to assign these to the
appropriate model objects.