Add
On-Grid |
Opens the Add
<material> Wall On-Grid Mode dialog, which is used
to graphically add walls between existing grid intersections. |
Add
Off-Grid |
Opens the Add
<material> Wall Off-Grid Mode dialog, which is used
to add a single wall by using existing beams, joists, columns or walls
as reference points. |
Add
Generation |
Opens the Add
<material> Wall Generation Mode dialog, which is
used to add multiple walls using an existing line of walls as a
reference point. |
Move |
Opens the Move
Wall dialog, which is used to move one or both ends of a
wall. |
Delete |
Opens the <material> Wall Delete Mode dialog, which is used
to delete walls |
Change
Properties |
Opens the Change
<material> Wall Properties Mode dialog, which is
used to change wall properties |
Change
Materials |
Opens the Change
<material> Wall Material Mode dialog, which is used
to change wall materials |
Show |
Prompts you to select a wall and then
opens the Wall Show Mode dialog, which
is used to show the properties and location of a wall. |
LL
Reduction |
Opens the Wall
<material> Live Load Reduction dialog, which is
used to assign a live load reduction factor percentage to one or more
walls |
Modify Elevation |
Opens the Modify Wall
Elevations dialog, which is used to create sloping beam
framing by changing the elevation of the top of the wall. |
Assign Eccentricity |
Opens the Assign
Wall Eccentricity dialog, which is used to assign
out-of-plane eccentric to walls. |
Wall Openings
> (Elevation View only)
|
Add |
Opens the Add Wall
Opening dialog, which is used to add wall openings in a
wall. |
Change |
Opens the Change Wall
Opening dialog, which is used to change an existing wall
openings in a wall. |
Delete |
Opens the Wall Opening Delete
Mode dialog, which is used to add wall openings in a
wall. |
Show |
Prompts you to select a wall opening and then opens the
Show Wall Opening dialog, which is
used to show the properties and location of a wall opening. |