Items to Change |
Check any or all of the items to change: H, B, X Offset, Y
Offset, Reference Corner, Pressure Distribution. |
|
|
Location |
Type the horizontal (Distance in X
Direction) and vertical
(Distance in Y Direction)
distances in the wall to define the corner of the
opening. Select the Reference
Corner to use for these distances. The
wall opening is always referenced from the corner
of a wall. If a wall is stretched or shrunk either
by moving a grid or changing the story height, the
opening will maintain is position relative to the
corner specified. Note: The diagram updates
according to which option you have
selected.
|
Dimensions |
Type the height (H) and
width (B) of the
rectangular opening. |
Units |
Specify if distance values used for placement
are given in Feet or
Inches. |
Single |
Click the target cursor on the wall opening whose properties you
wish to change. |
Fence |
Fence an area in which the properties of all wall openings will
be changed. |