Add <material> Wall Generation Mode dialog
Used to add a series of walls at regular spacing.
Opens when either:
- is selected
- the Generation tool is selected from the Layout Wall dynamic toolbar
Warning: Whenever a wall is created such that it intersects a member between supports, the member must be deleted and re-entered as two separate members framing into the new wall. See the "Important Modeling Considerations" section in the RAM Frame Basics chapter of the RAM Frame manual for more information.
Setting | Description |
---|---|
Beam Spacing | Generate walls at a fixed spacing from the start of the generation. |
Number of Equal Spaces Per Beam | Generate walls by specifying the number of equal spaces between walls. |
Equal Spacing Per Beam, Not to Exceed | Generate walls by specifying a maximum spacing between walls. |
Angel From Beam Line | Select the frame of reference from which the angle will be measured by selecting either Relative to Selected Beam Line or the Relative to X-Axis. Type the angle corresponding to this frame of reference. Angles values should be entered in 0 - 90°. The option to place at various configurations is then made graphically. |
Units | Specify if distance values used for placement are given in Feet or Inches. |