View menu
Image/Menu Item | Description |
---|---|
3D |
To display a three dimensional view of the model on the screen. |
Plan |
To display a plan view of the model on the screen. |
Elevation |
To display an elevation view of the model on the screen. |
Zoom - Full |
To display the model in Full screen mode. |
Zoom - Fence |
To zoom in on a Fenced area of the model. |
Zoom - In |
To zoom inwards on the current screen display. |
Zoom - Out |
To zoom outwards on the current display. |
Zoom - Previous |
To zoom to the most recent previous zoom setting. |
Rotate |
To rotate the three dimensional view of the model around the XY axes or to tilt the model on its Z axis. |
Extents |
To view a specified portion of the three dimensional model such as one specific floor or members that fall within given coordinates. |
Frames |
To view a frame or combination of frames referenced by the frame numbers. |
Members |
To view members or combinations of members referenced by type. |
Foundations |
To turn on and off the display of spread and continuous foundations. |
Foundation Nodes |
To turn on and off the display of foundation nodes. |
Disconnected Nodes |
To indicate which nodes are disconnected from the diaphragm. |
Node Numbers |
To turn on and off the display of node numbers. |
Nodal Loads |
To turn on and off the display of nodal loads. |
Brace Points |
To turn on and off the display of nodal loads. |
Options | To modify Pen Color, Scale Text size, Save Settings of the present display, or control the display of the Code Check Color palette. |
Tool Bar | To indicate whether the tool bar is to be displayed or hidden. |
Status Bar | To indicate whether the status bar is to be displayed or hidden. |
Reset Model |
To redraw the view that was on the screen prior to invoking the Results command. |
Find Member | To find a member or node in the current view. |