D1.H.1 Member Properties
In order to do this design in STAAD.Pro, the members in the structure must have their properties specified from Section VI of the above-mentioned manual. The section names are mentioned in Tables 5 through 28 of that manual. All of those tables except Table 10 (Wing Channels) and Table 20 (Bulb Angles) are available in STAAD.Pro.
Described below is the command specification for various sections:
D1.H.1.1 Standard single section
memb-list TA ST section-name
Example
1 TO 5 TA ST CS12X11.8
9 TA ST I8.00X13.1
11 33 45 67 TA ST LS8.00X8.00X0.625
18 TA ST 1.50PipeX160
15 TA ST T(A-N)6.00X8.00X11.2
23 25 29 TA ST 20X12RectX.500Wall
D1.H.1.2 Double channel back-to-back
memb-list TA BACK section-name SPACING value
Example
3 TA BACK C(A-N)7X3.61 SPACING 1.5
5 TA BACK C15X17.33 SP 0.75
D1.H.1.3 Double channel front-to-front
memb-list TA FRONT section-name SPACING value
Example
2 TA FRONT CS12X10.3 SP 1.0
4 TA FR CS10X10.1 SP 0.5
D1.H.1.4 Double angle long leg back-to-back
memb-list TA LD section-name SPACING value
Example
14 TA LD LS4.00X3.00X0.375 SP 1.5
D1.H.1.5 Double angle short leg back-to-back
memb-list TA SD section-name SPACING value
Example
12 TA SD L3.5X3X0.5 SP 0.25
13 TA SD L8X6X0.75 SP 1.0