To a set of design parameters to one or more
members, use the following procedure.
A parameter set is
specific to a solution set and the associated analysis type. Select the correct
solution set before adding a parameter set.
A parameter set is
used to assign a collection of steel design parameters (grade, seismic
detailing, etc.) to one or more members.
Note: Many of the
parameters do have default values, so they do not all need to be specified for
every member. However, any member to be designed in the Chinese Steel Design
workflow does require a parameter set assigned to it.
In the Chinese Steel Design workflow, select the
Parameters page.
The
<solution set name> - Design
Parameters dialog opens.
Note: The type of
analysis associated with the current solution set is displayed at the top of
the dialog.
On the
Chinese Steel Design ribbon tab, select the
design code from the drop-down list in the
Design group.
The parameters added are dependant upon the code selection made.
In the
<solution set name> - Design
Parameters dialog, click
Add.
The
Add New Chinese Steel Design
Parameters dialog opens.
Select and specify the parameters on each of the dialog tabs for
this set as needed.
Click
OK.
Parameter sets associated with a STAAD input
file are stored in a
.gsp with the same file name as the input file and
in the same file location. These are plain text files.