To specify the code checking or design commands to be
used for the timber design operation, use the following procedure.
-
On the
Timber Design - Whole Structure
dialog, click
Commands.
The Design Commands dialog
opens. The tabs (if any) available in this dialog are dependent on the current design
code selection. Not all commands are available for every design code.
-
To perform a design action, select one of the following options
(as they are available for the code selection):
To… | Select… |
---|
check the capacity of the
current member sizes |
the
CHECK CODE tab |
select a member size based
on the last analysis results |
the
SELECT tab (AITC 1984 code only) |
-
Click
Add.
-
Click
Close.
-
Assign the design commands to the appropriate members.