To create a user-provided table section with a single angle profile, use the following procedure.

1. On the Specification ribbon tab, select the User Table > User Table Manager tool in the Beam Profiles group.
   
   

   If no User Defined Table exists, you will be prompted to create one.

   The User Table Manager dialog opens.
   
2. Click New Table. The New User Table dialog opens.
3. the Select Section Type list, select ANGLE and then click OK. The dialog closes and the Table Data list in the User Table Manager dialog now has at least one entry.
4. Click Add.

   The Angle dialog opens.

5. Type a Section Name.
6. Required: Enter the following angle section parameters:

   D

   Depth of angle (i.e., length of the leg along the local y-axis)

   WF

   Width of angle (i.e., length of the leg along the local z-axis)

   TF

   Thickness of angle leg

   

   Angle section

7. Specify the section properties by either:

   Option	Description
   To automatically have the program calculate the section properties…	Click Calculate. The program calculates the R, Ay, and Az values from the provided section dimensions.
   To manually specify the section properties…	Type values for: Rad. of Gyration about Principal Axis (R), Shear Area in Y (Ay), and Shear Area in Z (Az)

8. Click OK.
9. (Optional) Repeat steps 4 through 8 to add more angle sections.
10. Click Close.