Slab Surface

(3D only) Used to place an extruded surface with a rectangular cross-section.

You can access this tool from the following:

Setting	Description
Axis	Sets the direction in which the height is extruded. Points — Direction of height is defined graphically. AccuDraw can be used to define the drawing plane on which the points are placed. Screen X, Y, or Z — Direction of the height is set to the screen's X, Y, or Z axis. Drawing X, Y, or Z — Direction of the height is set to the drawing's, or design file's, X, Y, or Z axis.
Orthogonal	If on, the edges are orthogonal.
Length	If on, sets the length.
Width	If on, sets the width.
Height	If on, sets the height.

Key-in: PLACE SLABSURF ICON