To Place a Slab Surface
-
Select the Slab Surface tool (
).
-
Enter a data point to define the origin.
When Axis is set to Points, and AccuDraw is active, a side of the slab is parallel to AccuDraw's drawing plane.
When Axis is set to Points, and AccuDraw is not active, a side of the slab is parallel to the view in which this data point is entered.
-
Enter a data point to define the length and rotation angle.
If Length is on, this data point defines the rotation angle.
-
Enter a data point to define the width.
If Width is on, this data point accepts the width.
-
Enter a data point to define the height.
If Height is on, this data point accepts the height.
If Orthogonal is on, the slab is orthogonal; all adjacent edges are perpendicular to one another.
