3D
|
To display a three dimensional view of the model on the screen. |
Plan
|
To display a plan view of the model on the screen. |
Elevation
|
To display an elevation view of the model on the screen. |
Zoom - Full
|
To display the model in Full screen mode. |
Zoom - Fence
|
To zoom in on a Fenced area of the model. |
Zoom - In
|
To zoom inwards on the current screen display. |
Zoom - Out
|
To zoom outwards on the current display. |
Zoom - Previous
|
To zoom to the most recent previous zoom setting. |
Rotate
|
To rotate the three dimensional view of the model around the XY axes or to tilt the model on its Z axis. |
Extents
|
To view a specified portion of the three dimensional model such as one specific floor or members that fall within given coordinates. |
Frames
|
To view a frame or combination of frames referenced by the frame numbers. |
Members
|
To view members or combinations of members referenced by type. |
Foundations
|
To turn on and off the display of spread and continuous foundations. |
Foundation Nodes
|
To turn on and off the display of foundation nodes. |
Disconnected Nodes
|
To indicate which nodes are disconnected from the diaphragm. |
Node Numbers
|
To turn on and off the display of node numbers. |
Nodal Loads
|
To turn on and off the display of nodal loads. |
Brace Points
|
To turn on and off the display of nodal loads. |
Options
|
To modify Pen Color, Scale Text size, Save Settings of the present display, or control the display of the Code Check Color palette. |
Tool Bar
|
To indicate whether the tool bar is to be displayed or hidden. |
Status Bar
|
To indicate whether the status bar is to be displayed or hidden. |
Reset Model
|
To redraw the view that was on the screen prior to invoking the Results command. |