To add a wind intensity versus height table to your physical model for defining wind loads, use the following procedure.

1. On the Catalog ribbon tab, select the Wind tool in the Create Load Definitions group.
   
   The Create: Wind Load Definition dialog opens.
2. (Optional) Type a unique Name for the new wind intensity load definition.
3. Select the Custom from the Code drop-down list The new load definition is selected and the properties are displayed in the Properties window.
4. Define the pressure profile:
   1. Click in the Intensity vs Height drop-down. The intesity vs heigh table is displayed.
   2. Type the wind pressure (Int) for each Height level sufficient for the height of the structure.
   3. Click OK.
5. Define the exposure factors for different model groups:
   1. Click the Exposure tab.
   2. Click in the Exposure drop-down. The exposure and group table is displayed.
   3. Type the exposure Factor to use for each different group and then select the group name from the drop-down in the Group cell.
   4. Click OK.
6. Click OK.