Action
|
Code of the selected Action. It is possible to switch to another action without leaving and re-entering the input function. |
Action will be skipped (Option)
|
The action will be skipped in the calculation process if the option is selected. |
|
Name of the load case, for which the stress check/the reinforcement design has to be done. |
|
Number of stress limit pair of the concrete, which represents the allowable stress (tensile strength) of uncracked concrete. Note: The calculated uncracked stresses are compared with the respective tensile limit.A check for cracked concrete is only done if this limit is exceeded.
|
|
Ordinal number of the stress limit pair used for cracked concrete analysis. Stress in concrete, reinforcement and tendons will be checked.
Attention: This number must be the same for all materials considered in the analysis.
Note: Any specified tensile stress limit for concrete will be ignored.
|
|
Optional entry. Name of the load case, which is used to calculate the initial strain of the tendons. (Translation in stress-strain curve for ultimate load analysis) Note: If * is entered the program takes the initial tendon strains from superposition 1, if empty (default), from the summation load case specified in the recalc pad.
|
|
If this option is selected, a reinforcement design will be done. It is done for elements, where the stresses, calculated by cracked concrete analysis, exceed the stress limit II. |
|
Optional entry. Name of a superposition file, whereto the calculate plane strain of cracked concrete shall be stored. This allows later check in form of list or plot files for this superposition file. Note: The superposition file must exist. (Generation with SupInit.)
|
|
Name of list file, whereto results of fiber stress check/ reinforcement design will be written. Default input '*' automatically generates a list file name:
- "fibi"+load case name+".lst", if a fiber stress check is done.
- "fibr"+load case name+".lst", if a reinforcement design (Option: Rein) is done. Example: Load case name "SLS" generate list files fibiSLS.lst or fibrSLS.lst
If there is no input, no list file will be created.
|
Delta-T
|
Duration of the Action (not applicable for this action) |
Description
|
Descriptive text for the selected Action (max. 80 characters) |