Element
|
Number of the current element |
Data in the table
|
Setting | Description |
---|
Elem |
Element number - increasing order |
Type |
Element type
- Beam: Beam element
- Cable: Beam element
- Spring: Linear spring element (static spring)
- SFrict: Friction spring
- SCont: Nonlinear spring
- SCompr: Compression only spring
- STens: Tension only spring
- SBilin: Bilinear spring (spring with 2 different case-dependent linear characteristics)
- Stiff: Arbitrary user defined stiffness matrix
- Flex: User defined flexibility matrix
- Vdamp: Viscous damper element
- SDamp: Damper spring
|
Status |
Activation status of the element
- Inact: Element is not active (has not yet been activated or has been deactivated)
- Act: Element is active
|
|
Parameters for the Creep and Shrinkage Calculation
|
Setting | Description |
---|
Age |
Concrete age when the element is activated |
ts |
Concrete age when the shrinkage process starts |
RH |
Average relative air humidity of the environment of the element (in %) |
RPR |
Stiffness ratio (As/Ac * Es/Ec)
- As: Reinforcement area
- Ac: Concrete area
- Es: E-modulus of reinforcement
- Ec: E-modulus of concrete
|
TMP |
Average ambient air temperature on site |
|
Parameters for the dynamic time history analysis
|
Setting | Description |
---|
Alpha;Beta |
Rayleigh-damping constants: [c] = alfa*[m] + beta*[k]
- [c]: Damping matrix
- [m]: Mass matrix
- [k]: Stiffness matrix
|
Damping |
Modal damping ratio for assessment of the different natural modes in case of modal analysis with frequency-dependent damping. The global value Xsi defined in is taken if no element value is defined. |
|