There are additional criteria that affect the design of the foundations. To set those options now:

• Select Criteria > Optimize.
  
• Set the Minimum distances from the base plate to 12 (250).
• Set the minimum from the column center to 18 (500).
• Set the Plan dimension increment to 6 (125).
• Set the minimum Thickness to 18 (500).
• Set the Thickness Increment to 6 (250).
• Set the Uplift Safety Factor to 1.
• Click on the Pile/Pile Cap tab.
  
• Set the spacing variables to 0.5, 18 and 6 (0.5, 450 and 150).
• Set the Center to Center of Piles options to 2, 32, and 24 (2, 800, 600).
• Set the Thickness options to 24, 6 (600, 150).
• Click [OK].