In order for the program to check the pile design, you must provide the unfactored capacity of the piles and the layout which should be used.

• Select Assign > Edit Piles.
  
• For the Label type 14in.
• Set the Diam to 14 (300)
• Compression capacity to 120 (500)
• Tension Capacity to 20 (100)
• Shear capacity to 5 (25)
• Click [Add].
• Click [OK].

To assign the pile cap geometry:

• Select Assign > Geometry > Pile Cap.
  
• Select the 14in pile on the left and the 3 Pile Group on the right
• Leave the other options in the default position and click [All].