| General tab
|
-
Identification area — Displays the
computer name and IP address of the server.
-
This server can publish datasources — If
on, you can create new datasources on the server. You need a license for this
option.
-
This server can only publish links — If
on, you cannot create datasources on the server, but you can access existing
ones. You do not need a license for this option.
|
| Security tab
|
-
Select security type - Connections —
Used to deny connections to the server from specified computers, or to allow
connections from a computer that is in the denied IP range.
-
Select security type - Datasource list
publishing — Used to prevent the server's datasource list from
being published to specified computers, or to allow the server's datasource
list to be published to a computer that is in the Do not publish to IP range.
-
Allow / Deny list — When Select security
type is set to Connections, the Deny field is used to deny connections from the
specified computers. You only need to add computers to the Allow list if you
specify a range of IP addresses to deny, and you want to allow connections from
one of the computers in the denied IP range. In either field you can enter an
IP address, address range, or host name of the computer(s) you want to allow /
deny.
-
Publish to / Do not publish to list —
When Select security type is set to Datasource list publishing, the Do not
publish to field is used to prevent the datasource from being published to the
specified computers. You only need to add computers to the Publish to list if
you specify a range of IP addresses to not publish to, and you want to publish
to one of the computers in the do not publish to IP range. In either field you
can enter an IP address, address range, or host name of the computer(s) you
want to Publish to / Do not publish to.
|
| Timeouts tab
|
Used to set the length of time a connection can be
idle (not sending requests to the server) before it is closed.
-
Time Out — Time in seconds that the
connection can be idle before the connection is dropped by the server. The
default is 600.
-
Wait Busy — Time in seconds that the
request by the web client may wait on the server to get services in the
situation that the server is currently serving the same client on another
operation. The default is 0.
|
| Connection tab
|
-
Use secure connection — Turn this
setting on when you want the server to run in secure mode. Turning this setting
on enables the SSL certificate common name field.
-
SSL certificate common name — Running in
secure mode requires an SSL certificate. After turning on Use secure
connection, enter the common name (CN) of your secure certificate.
Note: After you
configure the settings on the Connection tab, you must restart the
service for the
ProjectWise Design Integration Server, in
order to switch the server to now run in secure mode.
|
| Encryption tab
|
Displays the public key of the
ProjectWise Design Integration Server, which
the
ProjectWise Caching Server uses to
validate client requests and verify the user's access.
|
| Spatial tab
|
Used to set the location of the coordinate systems
dictionary, which by default is set to
C:\Program
Files\Bentley\ProjectWise\bin\dictionary. The coordinate systems
dictionary defines what coordinate systems are available for adding to the
datasource.
|
