Segment
|
Sets segment type; top, bottom, vertical or
diagonal.
|
Type
|
Sets shape type.
|
Class
|
Sets shape class for selected type.
|
Dimension
|
Sets shape dimension.
|
Rotation
|
Select a rotation angle (at 90° increments) from the
drop-down list.
|
Mirror
|
When checked, mirrors the selected shape.
|
Type
|
Sets number shape, e.g. single, single left, etc.
|
Insertion
|
Sets position shape, center or barycenter. Disabled
for Diagonal segments, and for Replaced and 4 Times types.
|
E
|
Sets inner distance between sections.
|
Approx
|
Sets the value to round off the length of the
segment.
|
Invert
|
When checked, inverts the segment.
|
Cut
|
When checked, cuts the segment.
|
Offset Bottom
|
Sets the bottom offsets;
- A – Sets the
segment offset from bottom chord.
- B – Sets the
bottom offset of the axis segment.
|
Offset Top
|
Sets the top offsets;
- C – Sets the
segment offset from top chord.
- D – Sets the
top offset of the axis segment.
|
Setting
|
Allows inserting drill.
- Drill – When
checked, inserts a drill.
- Dm – Sets hole
diameter from the standard diameters options from drop-down list.
- Play – Sets the
diameter with virtual free play required in manual insertion.
- Offset – Sets
distance between shape axis to the holes.
- Nr-X /
Nr-Y – Sets hole counts in X and Y directions, respectively.
- A – Sets
distance from hole to shape side to X direction.
- B /
C – Sets inner hole distance to X and Y directions, respectively.
|
Options
|
Allows additionally inserting a blind plate.
- Options
- Drill – When
checked, inserts a drill.
- Dm – Sets hole
diameter from the standard diameters options from drop-down list.
- Play – Sets the
diameter with virtual free play required in manual insertion.
- Sp – Sets the
thickness for blind plate.
- Max – Sets
limit for spacing between blind plate.
When checked, inserts a drill.
- Dir-X
- Nr
– Sets hole counts in X direction.
- A – Sets
distance from hole to shape side to X direction.
- B
– Sets inner hole distance to X direction.
- Dir-Y
- Nr
– Sets hole counts in Y direction.
- C – Sets
distance from hole to shape side to Y direction.
- D – Sets inner
hole distance to Y direction.
- Type – Sets the
number of blind plates to insert; Single or Double.
- Dist – Sets the
distance between blind plates.
- Rotation – Sets
the rotation angle to blind plate; 0° or 90°.
- Cross –
Indicates if blind plates are crossed.
|
List Segment
|
Lists the currently set segments. The type, number ,
shape and section details are listed in the tabular form.
- – Copies the properties of the
segment currently selected in the list.
- – Pastes the properties of the
segment currently copied in the clip board.
- – Resets the properties of
selected segment in the list.
|