Stair - Dimensions tab
Used to set overall
dimensions of the staircase.
| Setting | Description |
|---|---|
| Width | Sets the width of the staircase across outer steel edge. |
| Length | Sets the entire length of the stair construction. |
| Height | Sets the height of the staircase from starting point to upper edge stair head including gridiron. |
| Riser | Sets the desired rise per step of the staircase. |
| Step Count | Displays the resulting number of steps. The count is dependent of Height and/or riser value. |
| Angle | Displays the resulting gradient of the staircase. |
| Going | The resulting exact treading depth of the steps; however, you can specify a fixed value before and the construction will be calculated again based on this value. |
| Calculated Rise | The resulting exact rise of the steps; however, you can specify a fixed value before and the construction will be calculated again based on this value. |
| Upper insert point | When checked, the insertion point is set on the upper side of the staircase instead of on the lower side (and it is running to the bottom). |
| Dynamic | When checked, the changes to the settings can instantly be monitored in the view. |