| Bolts
|
- Bolt
Style – Sets the bolt style from the drop-down list.
- Dia. – Select
the hole diameter from the drop-down list.
- Workloose –
Specify the additional hole tolerance.
 (Edit Style) – Opens
the
Bolt Styles dialog, where bolt styles
are manipulated.
|
| Holes
|
Used to set the number of borings and the spacing of
the drilled holes to be observed. You can either specify absolute values or how
many times the amount of the hole diameter.
Note: If the entries
have to be a multiple of the hole diameter, put an asterisk (*) in front of the
multiplier.
- Shape
Direction
– Sets the number of drilled holes in the
direction of the bracing bar (on both ends).
- Edge -
1st hole
– Sets the distance from the end of the bracing
bar to the first hole center in the direction of the bar.
- Hole-Hole –
Sets the space between the drilled holes in the direction of the bar.
- Nth
Hole-Edge
– Sets the distance from the last hole to the
outer edge of the gusset plate in the direction of the bar. .
- Number
Cross – Sets the number of drilled holes crosswise to the bracing
bar.
- Distribution Cross
– Sets the distance between the drilled holes,
crosswise to the bar direction.
|
