To apply Fudge

Click the Fudge Rebar tool

(Concrete > Drawing Production > 2D Rebar > Fudge Rebar).

Select the bar to be fudged. The Fudge Rebar dialog box opens.

Note: Fudge rebar works only in 2D drawing models, however 3D model remains unaffected.

Select the desired Method of rebar.

Tip: See the description of Method setting in the Fudge Rebar tool topic.

As per selected method, set Distance, Multiplier. Move the cursor accordingly and right-click to accept the selection.

Note: Keep the dialog open after applying the fudge. So that same fudge data from previous fudge can be applied to other bars if required.

Incase of you need to reset the above setting click on

.