Example Output of an NC-File

ST
**************************************************************
**  DSTV NC data created by ProStructures CONNECT Edition [10.4.0.16]
**  Date: 6/26/2019
**  Time: 3:58:30 PM
**************************************************************
  ORDER NUMBER
    
  181
  250
      1
  30x6PL
  I
     2997.60,   3018.64
      677.90
      253.00
       16.20
       11.70
       15.20
      125.20
        2.34
       11.31
        0.00
        0.00
        0.00  
  
BO
  v      83.00o     540.30  10.00  0.00
  v      87.90o     515.80  10.00  0.00
  v      92.80o     491.30  10.00  0.00
  v      97.70o     466.75  10.00  0.00

AK
  v      93.72o    104.11        0.00
  v     177.71     120.91      -25.00
  v     207.13     101.29        0.00
  v     227.39       0.00        0.00
  v    2947.00       0.00        0.00

IK
  u     933.97o    208.15        0.00
  u     933.97     227.79        0.00
  u    1240.34     227.79        0.00
  u    1240.34     208.15        0.00
  u     933.97     208.15        0.00

SI
  v       5.00       5.00   0.0    5 24

EN

The report lists detailed data in respective block; e.g. includes, in addition to poly cuts the inner contour cuts due to the boolean operations of plate as IK block.

The Out/NC location stacks the reports sorted for each output types, under Sorting/ folder structure. The reports are appended in separate folder, each for output type: dxf | nc_parts | nc1_parts | zeman_assembler. The reports are appended with element ID to position number resulting in separate NC file for each part.

For Zeman Assembler output type, the part reports are stored in sub-folders ordered in number assigned to each, containing B profile XML and individual NC file of a part. The filename assigned using the position number and element ID: e.g. 67_ELID_13589.