| Boundary CAD Level |
is the CAD level boundary elements are drawn on.
- Constant: *DPAR-BOUNDARY-CAD-LEVEL*
- English: inlines
- Metric: inlines
|
| Grade |
The elevation to be used as grade throughout the site. This parameter affects default Z-coordinate values of equipment locations when positioning equipment in a model for the first time.
- Constant: *DPAR-GRADE*
- English: 1200.0 in
- Metric: 0.0 mm
|
| Headroom |
The minimum vertical clearance over stairs, platforms, walkways, passageways and working areas. This value is not used internally, rather it was designed for use in vicinity routing rules.
- Constant: *DPAR-HEADROOM*
- English: 90 in
- Metric: 2285 mm
|
| Levels Above Highest Obstacle |
The number of routing planes above the highest obstacle that will determine the upper boundary of the routing space.
- Constant: *DPAR-ROUTING-HIGHEST-LEVEL-OFFSET*
- English: 4
- Metric: 4
|
| Minimum Access Spacing |
The minimum distance two components can be from each other without creating a Proximity Conflict. This value is used when there is no Plant Spacing Class assigned to the component(s).
- Constant: *PW-MINIMUM-ACCESS-SPACING*
- English: 0.0 in
- Metric: 0.0 mm
|
| Minimum Line Spacing |
Used to calculate the obstacle formed by a pipeline. The Minimum Line Spacing is the distance between one pipe’s outer diameter and the adjacent pipe’s outer flange diameter – insulation thicknesses are include in the diameters when necessary.
- Constant: *DPAR-MINIMUM-LINE-SPACING*
- English: 1.0 in
- Metric: 25.0 mm
|
| Obstacle Vertical Clearance |
The distance an obstacle or equipment obstacle box is extended vertically downwards to block lower routing levels.
- Constant: *DPAR-PEDESTAL-MIN-VERTICAL-ROUTING-SPACE*
- English: 16.0 in
- Metric: 400.0 mm
|
| Pipeway Adjacency Threshold |
The maximum distance within which two perpendicular pipeways (exterior or structure) will be considered as intersecting by the Router.
- Constant: *DPAR-NEARBY-CHANNEL-DISTANCE-LIMIT*
- English: 241.0 in
- Metric: 6150.0 mm
|
| Plot Boundary Offset |
Defines the horizontal extension of the plot boundary (routing space) beyond the outside obstacles. Expressed as a multiplier of the Routing Plane Offset.
- Constant: *DPAR-PLOT-BOUNDARY-OFFSET*
- English: 4
- Metric: 4
|
| Routing Plane Offset |
The vertical distance between routing planes.
- Constant: *DPAR-ROUTING-PLANE-OFFSET*
- English: 36.0 in
- Metric: 1000.0 mm
|
