Pipeway
These constants establish pipe to pipeway relationships.
| Setting | Description |
|---|---|
| Drop Zone Location | Sets the default drop zone location for new pipeway sections. The
drop zone location can be overridden in the pipeway editor.
|
| Edge/Instrument Space | The amount of space (in the project default units) given to the
edge of the pipeway for items other than pipes.
|
| Flat Routing Required | Determines if turns from vertical to horizontal pipeways should
be routed with a flat turn.
|
| Pipeway Accessway Obstacle Status? | Determines if the volume under a pipeway is to be treated as an
obstacle to the free-space router.
|
| Spacing Round-off | The tolerance for berthing positions on the pipeway; for example,
the nearest half inch or 10 millimeters. Use zero to indicate no rounding.
|