To Place a Valve
- Select a valve from the Valves gallery.
- Select an insertion point on a Pipe Run. If more than one record exists in the specification for the valve, the Spec Record Selection dialog displays.
-
Select the desired valve from the list and click
OK.
The
Properties dialog displays.
Note: If the Tag Dialog Prompt option is disabled in the PID Document dialog, then you will not be prompted with this dialog at any point in the procedure. A tag number will automatically be assigned to the valve.
- Accept the default tag number, or enter a new value if required.
- Accept the default tag number, or enter a new value if required. The Properties tab is displayed.
- Make any necessary changes to the component properties in the corresponding fields.
- Click OK to place the component. By default the valve is placed and annotated with the main size.