To Assign Nozzle Tags from the Tag Browser
An equipment
component with nozzles must have been previously created in a 2D model and
checked in to PlantSight.
The following
procedure details how to assign 2D tags to an equipment component in the 3D
model using the
Tag
Browser.
- Click on an equipment component and open the Nozzle Manager.
- Create a nozzle record and fill out the necessary type and placement parameters.
-
Click the
icon to display the Tag Browser.
By default the Tag Browser will only list the nozzle tags which were defined for the selected equipment component.
- Select the desired tag for the nozzle and click OK.
- Save the changes and Close the Nozzle Manager. To view the nozzle tag's properties right-click on the nozzle in the model and click Properties.