To Place a Horizontal Pump from Spec
Most of the
equipment options are parametric which means that you select the option and
define the geometrical features of the equipment before placing it. The
Horizontal Pump from Spec option however, displays the
Spec
Record Selection dialog which contains a list of horizontal pumps that
are already defined in the spec. The geometrical properties of these pumps
cannot be modified.
- Select the Horiz Pump Spec icon from the Pumps gallery. The Spec Record Selection dialog appears:
- Select the pump record from the dialog and click OK. The Place Equipmentdialog appears.
- In the Associations tab, select the Unit and Service values to associate with the pump if required.
- Expand the Properties tab and enter a tag number for the component.
- Define the dimensions for the component in the Design Geometry tab. Match the property fields to the corresponding dimensions in the preview image.
- Define any additional property values in the corresponding tabs.
- Pick a placement point for the component or enter the coordinates directly into the Accudraw window.
- Select the rotation for the component by picking a point in the drawing or entering the value in the AccuDraw window.
- Right-click to terminate the command.