Pipe
|
Variable length component
which requires a Start point and end point for the component. Continuous runs
can be placed complete with bend/branch options that can be automatically
placed using the AutoFitting method.
|
PIPE
|
Wall Pipe
|
Variable length component
placed using a start and end point. The length from the start point to the
collar is defined in the Place Component dialog. (AutoFitting method is not
available when placing Walled Pipe)
|
WALL_PIPE
|
Spool Piece
|
Fixed component length
component placed using a placement point and picking a direction for the
component. The length is defined in the Place Component dialog. There is an
option when placing spooled pipe which enables you to place multiple instances
over a distance automatically. The Auto-Placement option is included in the
Place Component dialog when the Place Spool Piece option is selected.
|
SPOOL_PIECE
|
Flexible Hose
|
Variable length component
which allows you to create curves with the placement by selecting multiple data
points in the drawing.
|
FLEXIBLE_HOSE
|
Freeform Nozzle
|
A Freeform nozzle can be placed
freely on equipment or in space like any other piping component using mouse and
Accudraw. When placing on equipment, it will be placed so that it is
perpendicular to the equipment surface it is being placed (i.e. it's main port
direction will be perpendicular to equipment surface nozzle is placed on).
|
Key in: mechaddin
freeformnozzle
|