Add Strand Symbols

1. From the Facilities Tab, select the Ground 1 dropdown in the Placement section:

   

2. Select the appropriate Symbol command.
3. Select a pole or pedestal on the map.
   Note: The Facility module is hard coded to use the following 6 cell names for the Strand symbols that can be placed. The cell itself can be changed and/or edited, but the cell name must remain the same and exist in the active cell library:

   Cell Name	Strand Symbol
   GRND1	Ground 1
   GRND2	Ground 2
   DWNGUY	Down Guy
   LANCHR	Anchor
   OVRGUY	Overhead Guy
   CONTAR	Continuation Arrow