Diffuser and Plenum Box Properties
Property Name | Description |
---|---|
Air Flow Rate (CFM)
Air Flow Rate Unit |
Positive <numeric value> This property is used by the Analysis tool for calculating upstream air flow rates for connected elements. Diffuser/plenum fittings when used as route openings in the duct sizing, takes the air flow value for calculation. |
Auto Size |
Mesh: h <numeric value> v <numeric value>4way: nh <numeric value> nv <numeric value> t <numeric value>others: n <numeric value> t <numeric value> Grille Type Each option is separated with a delimiter / .Example: mesh:h=4;v=4/4way:nh=5;nv=5;t=0.5/others:n=5;t=0.5 Note: updating values in the string option for the current Grille Type reflects the changes in the diffuser grille. |
Body | Cone Diameter | Positive <numeric value> |
Body | Cone Height | Positive <numeric value> |
Body | Cone Top Diameter | Positive <numeric value> |
Border Width | Positive <numeric value> |
Box Border | Positive <numeric value> |
Box | Depth | Positive <numeric value> |
Box | Height | Positive <numeric value> |
Box | Top Border | Positive <numeric value> |
Box | Top Depth | Positive <numeric value> |
Box | Top Width | Positive <numeric value> |
Box | Width | Positive <numeric value> |
Columns | <integer> |
Connection 1 | Length (L1) | Positive <numeric value> |
Connection | On Left Side |
|
Connection | On Right Side |
|
Connection | End Type |
fl
-<numeric value>
m
-<numeric value>
fe
-<numeric value>
Separate End Type entries for each End Spec with a semi
colon.
Example: fl-2; creates a flange at End1 with size 2, and fe-.13; creates a female connection at End1 with an overall reduction of component's dimensions of .13 |
Connection | Length | Positive <numeric value> |
Connection | Side | 1-top 2-side |
Duct Connecting Length | Positive <numeric value> |
Equipment Connecting Length | Positive <numeric value> |
Flange | Size | Positive <numeric value> |
Grille | Depth | Positive <numeric value> |
Grille | Diameter | Positive <numeric value> |
Grille | Thickness | Positive <numeric value> |
Grille | Type |
Grille Type selected here overrides the one set in Auto Size dialog. |
Grille |Width | Positive <numeric value> |
Jet Distance | Positive <numeric value> |
Jet Length | Positive <numeric value> |
Jet Size | Positive <numeric value> |
No. of Slots | <integer> |
Number of Ports | <integer> between 1 and 4. |
Orientation |
|
Outside Diameter | Positive <numeric value> |
Outlet pressure (in. wg) | Positive <numeric value> |
Panel Depth
Panel Thickness Panel Width |
Positive <numeric value> |
Port Offset | Positive <numeric value> |
Rows | <integer> |
Slot Width | Positive <numeric value> |
Thickness | Positive <numeric value> |
Throw Pattern |
|
Property Option menus are available to assist in making some property entries.