Options - HVAC diffusers
|
- Grille
Options — Grille types can be selected here.
- Grille Type —
lists grille types, a grille types selection enables/disables applicable group
settings.
- Mesh –
enables Mesh settings group.
- Bars –
enables Others settings group.
- BarSlots –
enables Others settings group.
- 4Way –
enables 4Way settings group.
- Star –
enables Others settings group.
- RectSlots –
enables Others settings group.
- Mesh — Sets
mesh grille parameters.
- Horizontal
Spacing
h — sets lateral spacings in Mesh
grilles, in a numeric value.
- Vertical Spacing
v — sets vertical spacings in Mesh
grilles, in a numeric value.
- 4Way — Sets
4-way grille parameters.
- Horizontal
Spacing
nh — sets horizontal slots in 4Way
grilles, in an integer value.
- Vertical Spacing
nv — sets vertical slots in 4Way
grilles, in an integer value.
- Thickness
t — sets the thickness of the bar in
each slot, in numeric value.
- Others — Sets
other categories grilles parameters.
- Number of
slotsn — sets number of slots in grilles, in an integer
value.
- Thickness
t — sets the thickness of the bar in
each slot, in numeric value.
OK — Applies
Auto Size settings. It will reflect in
DataGroup Instance Data panel as a string (example,
mesh:h=4;v=4/4way:nh=5;nv=5;t=0.5/others:n=5;t=0.5).
|
Options - HVAC Equipment and Inline Devices
|
Auto Size options in Damper, Filter, Fans etc.
- Body Type Options —
Body types can be selected here.
-
Symmetric – Sets device enclosure
and dampers to be symmetrical.
-
Box Size – Sets device enclosure's
height and width offsets when it is larger than the end connection dimensions
or if an asymmetrical device is desired.
- Box Delta
Depth – sets the depth for device box, in numeric value.
- Box Delta
Width – sets the width for device box, in numeric value.
-
Equal Ends – Sets both ends equal
in size.
|