| Insertion Angle
|
- Angled
Insertion – When checked, stiffeners can be inserted in the shape
using a slant. At insertion, you are prompted for a line specifying the
direction. The necessary extension of the stiffener width is automatically
calculated.
- Angle – Enabled
for
Angled Insertion. Sets the position
angle related to the centerline.
|
| 2D-Section
|
When checked, an automatic 2D section is inserted
directly at the stiffener. This section can be displayed during detailing.
The cutting plane is situated slightly in front of
the stiffener and it ends slightly behind the stiffener; the cutting direction
is always in shape direction.
|
