| Distribution Shape Direction
|
- Number
Shape – Sets the number of drill holes in both sides of the web
angle cross-wise to the shape to be connected (in the original position
parallel to the connecting shape).
- Edge
Distance – Sets the distance from the end of web shape edge to the
1st bolt.
- Distance
Between – Sets the inner distance between two holes in the
direction of shape.
|
| Distribution Connecting Shape Direction
|
- Number
Shape – Sets the number of drill holes in the long side of the web
angle (in the original position parallel to the shape to be connected).
- Slot
Length – Sets the slotted hole distance.
- Rotate
Slot – When checked, rotates the axis of slot.
- Inner
Distance – Sets the distance from the end of connecting shape edge
to the 1st bolt.
- Distance
Between – Sets the inner distance between two holes in the
direction of shape.
|
| Distribution Supporting Shape Direction
|
- Number
Shape – Sets the number of drill holes in the short side of the web
angle (in the original position cross-wise to the connecting shape).
- Slot
Length – Sets the slotted hole distance.
- Rotate
Slot – When checked, rotates the axis of slot.
- Inner
Distance – Sets the absolute inner distance, that is distance from
the center of shape to the 1st bolt.
- Distance
Between – Sets the inner distance between two holes in the
direction of shape.
- Absolute
Inner Distance – When checked, the inner distance of the holes in
the short leg means the distance between the holes.
|
