Rebar Modification Ribbon Tab

Contains tools used for manipulating reinforcing bars and bar end conditions.

Table 1. Rebar group
Tool name	Description
Edit Rebar	Used to edit any existing individual rebar in any existing rebar cage.
Move Rebar	Used to move a single bar or multiple bars contained in a rebar cage.
Copy Rebar	Used to make a duplicate of an existing bar on your model.
Delete Rebar	Used to delete individual bars or stirrups from a rebar cage.
Explode Rebar	Used to break apart rebar cages into individual bars.
Stretch Rebar	Used to stretch the selected rebar.
Trim Rebar	Used to trim the selected rebar.
Extend Rebar	Used to lengthen the selected rebar.
Break Rebar	Used to break the selected rebar into two segments.
Lap/Splice Rebar	Opens the Create Rebar Lap Splice dialog, which is used to create a lap splice at any given point of an existing piece of rebar or rebar cage.

Table 2. End Conditions group
Tool name	Description
Edit Single Rebar	Used to modify a rebar's end conditions.
Edit	Opens the Edit End Condition dialog, which is used to apply a standard or user-defined end condition to an existing rebar.
Delete	Used to delete the end condition on an selected bar.
Convert End Condition to Bent Bar	Used to covert a single rebar or a rebarset End Condition to U bar using the `<Ctrl>` key.
Rotate End Condition	Used to rotate the end condition of a selected bar by either 90° or a user-specified amount.
Align to Line	Used to align a selected bar's end condition to a line (typically the edge of concrete).