To add a beam definition for a slab with steel girder bridge that uses a rolled shape, use the following procedure.

1. Select a beam in the Beams list.
2. Select Rolled Shapes from the Beam Sections drop-down.
3. (Optional) Type a Beam Minimum Haunch height. Minimum Haunch Height is measured at the CL of beam (in beam cross section).
4. (Optional) You can create a beam splice within a span to vary the rolled shape or material:
   1. Click Insert Row After (). A new row is added to the table.
   2. Type the Distance or Ratio value. The other value will be automatically populated based on the selected beam's span.
   3. Select Head or Tail in the From cell drop-down to indicate where the distance or ratio is taken from.
   4. Select either Distance or Ratio in the Lock To cell drop-down to indicate which value to use.
5. For the beam or beam segments, select the Template and Material from the respective cell drop-downs.
   1. For Haunch, the Material is assumed to be the same as the deck material.
6. Either:

   select a different beam in the Beams list to define it

   or

   copy a beam definition to other beams

7. Once you have defined all the beams in the layout, click OK.