-
Select the
Angular
Dimensioning tool.
-
Set the mode to Angle Size.
-
Enter a data point to define the dimension start point. The
dimension is measured in a counterclockwise direction from this point.
-
Enter a data point to define a point on the axis.
-
Enter a data point to define the endpoint of the dimension.
-
Enter a data point to define the direction and length of the
extension line.
Note: To place a dimension with a leader select Manual in the Location
Setting.
-
Do one of the following:
Go back to step
5 to place another dimension using the same start point.
or
Reset to
complete the dimension.
Dimensioning
an Angle with Mode set to Size
